What are you looking for?
draft
shopping_basket
  • Get in touch

    • Sideconnect chip holder

    SKU
    SC_HOLDER
    Availability:
    check_circle In stock
    As low as $638.04

    per Kit

    Sideconnect interfacing kit.

    main product photo

    The Sideconnect interfacing kit enables a fast, easy and robust connection of sideconnect chips. The position of the tube-chip connection on the edge of the chip allows a smooth flow with less bubbles and requires less reagents. The design of the body grants a large viewing area and is compatible with upright and inverted microscopes.

    This kit needs to be combined with a Sideconnect ETFE connection kit. To keep the body and connectors in place during assembly, an assembly tool is recommended. Accessories can be stored in the built-in storage box of the assembly tool. The mounting frame is a tool which helps to keep the Sideconnect interface in place during experiments, especially when mutiple chips and Sideconnect chip holders are used. 

    This product is available in the following configurations:

    SKU Name

    Use case

    For chip length
    [mm]

    		 For chip width
    [mm]
    01370

    Sideconnect chip holder 15mm x 15mm

    		 Webstore sideconnect chips 15 15
    01371

    Sideconnect chip holder 15mm x 30mm

    		 Custom chips 30 15

     

    WHY USE SIDECONNECT?

    • Planar interfacing of tubing with chips offers a smooth flow without shear stress.
    • Small dead volumes at inlets and outlets minimise reagent amounts required.
    • Dimensions are compatible with upcoming international microfluidics design standards which make exchange of other industrial microfluidic devices possible.
    • Autoclavable and easy mounting which makes it suitable for applications that require a sterile flow system, e.g. a cell culture.
    More Information
    More Information
    Unit of measurementKit
    Holder conceptSideconnect
    Compatible tubing outside diameter(s)1/16"
    Documents
    Icon Label Description Type Size Download
    pdf Sideconnect Manual Manual for assembly of the Sideconnect holder with a chip and connection kit. pdf 5.4 MB Download
    Product Questions (2)
    Customer Questions
    I have a Elveflow OB1 pressure based pump what connectors do I need?
    Nuts and ferruleElveflow uses 1/4-28 screw in connections on there reservoirs and sensors. To interface you will need Flangeless nuts 1/4-28 for 1/16" tubing, including compatible ferrules. Those nuts and ferrules are included in Elveflows "Kit Fittings Starter Pack Push-in".This item wil look like this: In addition you will need our connection kit. Our Connection kit includes nuts or ferrules specificilly designed for our Fluidic Connect Pro, Fluidic Connect 4515 or side connect holders. Tubing included in "Kit Fittings Starter Pack Push-in"The 1/16"OD PTFE tubing included in the kit has a very large ID (1/32" ~0.79mm) and is from a relatively soft material, this is not so suitable for bot our Fluidic Connect Pro and Fluidic Connect 4515 holders as there's very limited wall thickness. We recommend alternative tubing, like ETFE with a maximum of 0.5mm ID. This tubing is included in our connection kits. Use of 1/32" OD tubing1/32" OD tubing can be in combination with our Fluidic Connect Pro holder also be used, but need alternative ferrules.The ElveFlow "Kit Fittings Starter Pack Push-in" doesn't include sleeves for use of 1/32" OD tubing. They are included in our Syringe to tube connection kitOur Sideconnect our Fluidic Connect 4515 holders doens't support 1/32" tubing.
    Read More
    I have a Fluigent pressure based pump, what connectors do I need?
    Lineup We recommend the dafault Fluigent kits (FLOW EZ™ SUPPLY KIT, FLUIWELL KIT or P-CAP KIT)The P-cab or FLUIWELL KIT already contains 0.5m 1/16" OD FEP tubing with a ID of 500µm, when you use only limited pressures, you can try this tubing first and only order: For Fluidic Connect Pro our propriatary ferrules.  For Fluidic Connect 4515 our propriatary flatbottom nuts and ferrules.  For Sideconnect our propriatary ferrules.  For optimal performance we recommend our complete connection kit, the FEP tubing might be a bit soft limiting the pressure rating.  MFCS We recommend the dafault Fluigent kits (MFCS™-EZ HIGH/LOW PRESSURE KIT, FLUIWELL KIT or P-CAP KIT )  The P-cab or FLUIWELL KIT already contains 0.5m or 1m 1/16" OD FEP tubing with a ID of 500µm, when you use only limited pressures, you can try this tubing first and only order: For Fluidic Connect Pro our propriatary ferrules.  For Fluidic Connect 4515 our propriatary flatbottom nuts and ferrules.  For Sideconnect our propriatary ferrules.  For optimal performance we recommend our complete connection kit, the FEP tubing might be a bit soft limiting the pressure rating. 
    Would you like to submit a question? Please login first.
    Related Products
    1. Ferrules for Sideconnect chip holder
      Ferrules for Sideconnect chip holder
      $204.31
    We found other products you might like!
    1. Droplet generation setup - sideconnect (no pumps included)
      Droplet generation setup - sideconnect (no pumps included)

      From $1,012.42

      To $4,045.14

    Copyright © 2020-present Micronit B.V. All rights reserved.