Microreactor

SKU
Microreactor
Availability:
check_circle In stock
As low as $256.94

per pack of 3

Pack of 3 microreactor chips.

Mixing and heating fluids in a microreactor gives a very high degree of control on the chemical reaction.

The following product options are available:

SKU

Internal volume
(meander)[µl]

Channel width
[µm]

Channel height
[µm]

Inlet channel length
[mm]

Main channel length
[mm]

Manufacturing technique

Thin bottom
[145µm]

Coating

11003694 0.3 50 20 7 328 Etching Yes No
11003644 0.3 50 20 7 328 Etching Yes Hydrophobic
11003040 1.86 140 45 7 343 Etching Yes No
11006834 1.86 140 45 7 343 Etching Yes Hydrophobic
11003033 15.2 250 140 7 494 Etching No No
11006291 15.2 250 140 7 494 Etching No Hydrophobic

Note that chips manufactured using powderblasting have a high channel roughness on the sides and bottom. The top face offers the best optical properties, this is the side with the inlet holes.

More Information
Unit of measurementpack of 3
Interface typeTopconnect
Chip materialBorosilicate glass
Number of inlets2
Number of outlets1
Icon Label Description Type Size Download
pdf Drawing R50.332.3 Serpentine 20x50µm, 342mm pdf 79.1 KB Download
pdf Drawing 03040 Serpentine 45x140µm, 350mm, TB pdf 76.9 KB Download
pdf Drawing 03033 Serpentine 140x250µm, 500mm pdf 94.2 KB Download
Customer Questions
What is the roughness of the etched structures?
Wet etched structures are extremely smooth and have a roughness in Angstrom range. The structures are fully optical transparent. 
Large roughness for structures in glass chips is typical observed for structures manufactured by use of laser assisted manufacturing techniques or abrasion-based techniques like powder blasting. Almost all catalogue products from Micronit are manufactured using wet etching to create full transparent channels without substantial roughness. 
Would you like to submit a question? Please login first.
Copyright © 2020-present Micronit B.V. All rights reserved.