Materials

Button Contactform

To the webshop

Materials

- glass;
- borosilicate;
- fused silica or synthetic
  quartz;
- thin glas;
- polymers 

  • PMMA;
  • COC;
  • polystyrene;
  • polycarbonate

 

Materials

Micronit Microfluidics uses glass, fused silica, silicon and plastics as material for its products. The choice of material depends on the function of the part. For instance a chip acn be made with a functional part of glass for a high quality test but with a plastic cartridge to allow handling and chip indentification. 

Glass

Glass has many advantages in relation to other materials: glass is chemically inert, hydrophilic and optically clear for instance. Glass thicknesses down to 30µm can be handled.

Borosilicate

Borosilicate glass is a very commonly used glass type. It can resist strong acids, saline solutions, chlorine, bromine, iodine and strong oxidizing and corrosive chemicals. Even for a longer period of time and at temperatures above 100 ˚C it exceeds the chemical inertness of most metals and other materials.

Borosilicate glass is mass produced, and therefore not expensive. It is available in many different thicknesses.

Fused Silica or Synthetic Quartz

For certain optical applications, borosilicate glass does not have the optimal specifications. Using fused silica chips can then offer a solution. The main advantages of fused silica are its transparency in the UV regime, its low autofluorescence, and its resistance to high temperatures.

Fused silica is often confused with quartz. But whereas quartz is a crystalline material, fused silica is amorphous, just like other glass types. Fused silica has excellent optical properties and an uniform chemical consistence.

Typical Transmittance of Glass - Click to Zoom

In the graph above, the typical transmittance of borosilicate and fused silica are plotted as a function of the wavelength (click on the image to enlarge). Fused silica has a high optical transmittance, even with low wavelengths. It can be used in applications with a wavelength down to approximately 190 nm. For comparison, most borosilicate glass types are transparent down to 350 nm. Fused silica is the best material for applications that require UV transmittance or need low autofluoresence.

Thin Glass

Micronit can handle and process glass sheets down to 30 µm thickness.

Thin glass is especially suited as a cover layer for microfluidic chips. The main use is in applications using confocal microscopy, but other applications requiring fast heating/cooling or low absorption of light or x-ray radiation could also benefit from thin glass layers.

Polymers

Micronit uses:

- PMMA

- COC

- Polystyrene

- Polycarbonate

 

© Micronit 2014 | all rights reserved | disclaimer